Send E-mail
Call 0804603471471% Response Rate
Creative Labs
Creative Labs
Khuda Khurd, Ambala, Haryana
GST No. 06BABPM7520F1Z0
Send E-mail
Call 0804603471471% Response Rate
Our Products

Isothermal C.S.T.RYes! I am interested
Description:

In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Experimentation:

Single Cylinder Four Stroke Diesel Engine Test RigYes! I am interested
DESCRIPTION:
 IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, and type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.
 EXPERIMENTATION:
To determine Brake Power
To determine fuel consumption
To determine specific fuel consumption
To determine Brake Thermal Efficiency
Utility required ???
Electricity Supply: Single Phase, 220V AC, 50 Hz, 5-15 amp. Combined socket with earth connection.
 Water Supply: Continuous @5LPM at 1 Bar pressure.
Floor Drain required
Diesel : 20 liters
Exhaust Emission
Floor Area: 3m x 2 m
Techometer
Technical detail 
Type of Engine         :    Single cylinder, four strokes, vertical water cooled, crank start,                         diesel engine developing 5 HP at 1500. (Kirloskar New Engine)
Type of Loading         :    TD-04A - Rope Brake Dynamometer
                    TD-04B - Eddy Current Dynamometer
                    TD-04C - Electrical Brake Dynamometer
                    TD-04D - Hydraulic Brake Dynamometer
Fuel Measuring System     :    Fuel measuring system consists of a fuel tank, a burette                         and a three way cock arrangement.
Air intake Measuring System    :    Air tank fitted with orifice and manometer.
Exhaust gas calorimeter     :    An Exhaust Gas Calorimeter, made of Stainless Steel will be
                    provided for calculating heat carried away by exhaust gases.                         The body of the calorimeter is insulated with    ceramic wool                         and cladded by Aluminum foil. Digital    Temperature indicator                     with Temperature sensors at    appropriate position will be                         provided.
Temperature Measurement     :    Digital Temperature Indicator with multi-channel switch
Temperature Sensors         :    Thermocouple K-Type.
Instruction Manual         :    An ENGLISH instruction manual will be provided along with                         the Apparatus
The whole setup is well designed and supported by a good quality painted rigid M.S. Structure.
Reciprocating Pump Test Rig (Variable Speed)Yes! I am interested
Description:

The present Reciprocating Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Double acting, Single Cylinder Reciprocating Pump coupled with a DC Motor  Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of water is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.

Experimentation:

Venturimeter & Orificemeter Test RigYes! I am interested
Description:

The apparatus consists of two pipelines emerging out from a common manifold.  One pipe line contain a Venturimeter and other contains an Orifice. The pressure tapings from the Venturimeter and orifice meter are taken to differential manometer to measure pressure difference. The Venturimeter and Orificemeter are connected in parallel and any one of them can be put in operation by operating valves provided at the downstream. The flow can also be regulated by these valves.  Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

Experimentation:

Static & Dynamic Balancing DemonstratorYes! I am interested
This equipment is designed for carrying out the experiment for balancing a rotation mass system. The apparatus consists of a stainless steel shaft fixed in a rectangular frame. A set of four blocks with a clamping arrangement is provided. For static balancing, each block is individually clamped on shaft. For dynamic balancing, a moment polygon is drawn using relative weights and angular and axial position of blocks is determined. The block are clamped on shaft is rotated by a motor to check dynamic balance of the system. The system is provided with angular scale and is suspended with chains for dynamic balancing.

EXPERIMENTATION:
To balance the masses statically and dynamically of a single rotating mass system.
To observation of effect of unbalance in a rotating mass system.

UTILITIES REQUIRED
Electricity Supply : 220 V AC, Single Phase, 0.5 kW with earth
Floor Area 0.5m x 0.5m
Digital Tachometer

TECHNICAL DETAILS
Drive Motor        :     FHP Motor, variable speed, with speed controller.
Balancing weight    :     4 Nos. of Stainless Steel with different sized eccentric mass                 for varying unbalance.
Rotating Shaft        :     Material Stainless Steel
Instruction Manual    :     An ENGLISH instruction manual will be provided along
                With the Apparatus.
Solid Liquid ExtractionYes! I am interested

With firm commitment to quality, we are engaged in offering excellent quality, Solid Liquid Extraction (Packed Bed Type) . These are designed under the strict command of our quality analyzers keeping in mind the industry guidelines. Post production, these products are stringently tested on varied grounds, to ensure their compliance with international quality standards.

 

Features:

Composite Walls ApparatusYes! I am interested

We are engaged in offering high quality Composite Walls Apparatus to the esteemed customers. These apparatuses are manufactured using genuine raw material, under the able guidance of our team of experts. Moreover, we make sure to timely deliver the ordered products at the customers' end, via our wide distribution network.

 

Features:

 

Pelton Wheel Turbine Test RigYes! I am interested

Our clients can avail from us high quality Pelton Wheel Turbine Test Rig to the esteemed customer, as per their specific requirements. Widely used for experimental purposes, these products are highly demanded in various laboratories and industries. The range is manufactured using cast iron, steel or brass. Moreover, these products are fitted with a big transparent acrylic window, nozzle & spear arrangement, rotor assembly of shafts, runner and brake drum that are mounted on a strong base frame.

Features:

 
Welcome to

Creative Labs

  • Nature of BusinessExporter
  • Total Number of Employees26 to 50 People
  • Year of Establishment2006
  • Legal Status of FirmIndividual - Proprietor
  • Annual TurnoverRs. 2 - 5 Crore
  • Import Export Code (IEC)33120*****
  • GST No.06BABPM7520F1Z0

IndiaMART Certification

Trust Seal Verified
We, "Creative Labs", are one of the trusted ISO 9001:2008 certified Manufacturers, Exporters, Suppliers & Service Provider of a superior quality range of Engineering Lab Equipment since 2006. The entire range is manufactured using quality-tested components and other raw material procured from some of the most trusted vendors of the industry.

We have been constantly providing complete satisfaction to our clients in terms of performance and durability of our products. Owing to our ethical business policies and principles, we have gained huge client base across the country. Our assorted range of Engineering Lab Equipment are highly acclaimed for their efficient performance. Further, to analyze the requirements of our clients, our team members keep themselves updated with the latest technologies and equipment. Further, to ensure quality standards of the products, all our instruments are stringently inspected on several parameters before transit.

We make sure to employ the advanced technology and machinery for carrying our production related activities. Along with our advanced manufacturing facilities, we combine the immense expertise and experience of our professionals to offer a high quality range of products to the customers. The products offered by us meet the international quality standards, thus, are highly demanded in various industries and sectors. Moreover, we offer customized products to the clients that are designed as per the exact details provided by the clients. Our range of instruments is widely appreciated for its efficient functioning, easy installation, user-friendly interface and longer service life. Besides, the products are exported to all across the Indian Subcontinent.


Read More...
 

Corporate Information

Creative LabsCreative Labs


 

 

Send SMS
Sagar Sharma  (Managing Director)
Creative Labs
,12,Jagadhari Road,,chota khudda, Industrial Estate, Khuda Khurd, Ambala - 133001, Haryana, India
Share Us:
Send E-mail