Creative Labs
Creative Labs
Khuda Khurd, Ambala, Haryana
GST No. 06BABPM7520F1Z0
Send E-mail
Call 0804603471462% Response Rate
Home  » Products » 

Applied Machines


Our product range includes a wide range of four bar mechanism, friction slide model, simple jib crane, single slider crank mechanism, inclined plane apparatus and pulley demonstrate-on set.

REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
Minimum Order Quantity01 Piece
BrandCREATIVE LAB

DESCRIPTION

Acrankis an arm attached at right angles to a rotating shaft by whichreciprocating motionis imparted to or received from the shaft. It is used to convertcircular motioninto reciprocating motion, or vice versa. The arm may be a bent portion of the shaft, or a separate arm or disk attached to it. Attached to the end of the crank by a pivot is a rod, usually called aconnecting rod. The end of the rod attached to the crank moves in a circular motion, while the other end is usually constrained to move in alinearsliding motion.


Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

DESCRIPTION

To measure the coefficient of friction for several combinations of materials, making use of an inclined plane. Wooden board approx. 75x15 cm. with glass surface, a frictionless pulley is fixed to one end.


Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Description
Consisting of a tubular compression balance pivoted about an axis and fitted to the base. The tie chain has an adjustable angle bracket and fitted with a extension balance. Complete wooden base with 1.2m jib.

Height about-120cm, consists of three parts jib and tie rods, capacity- 2.5kg

Complete with all accessories.



Additional Information:
  • Item Code: CLAM-24

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

DESCRIPTION

Acrankis an arm attached at right angles to a rotating shaft by whichreciprocating motionis imparted to or received from the shaft. It is used to convertcircular motioninto reciprocating motion, or vice versa. The arm may be a bent portion of the shaft, or a separate arm or disk attached to it. Attached to the end of the crank by a pivot is a rod, usually called aconnecting rod. The end of the rod attached to the crank moves in a circular motion, while the other end is usually constrained to move in alinearsliding motion.


Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Description

Wooden board and a frictionless pulley at one end, a scale pan with the following accessories

1. One set of three wooden carriages with different bottom surface (Wooden, glass and/iron).

2. One carriage with frictionless rollers

3. Different surfaces for friction board-a glass plate, a plywood and felt cloth"


Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Description

Comprised of a rectangular laminated wooden base about (I x d), 20 x 82cm approx. which supports two threaded rods measuring approximately 12.5mm x 81cm in metal flanges and is fitted with a capstan and a screw eye. Eight clamps (hook collars) are provided for suspending pulleys and cords on an adjustable cross rod approximately 12.5mm x 81cm, held by right-angle clamps.



Additional Information:
  • Item Code: CLAM-36

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

The effort wheel is of C.I. material of 25 cm diameter with a hole for effort attachment mounted on a shaft of about 40mm dia. On the same shaft a geared wheel (ma chine cut) of 1 media shall be mounted. The teeth of this pinion wheel shall mesh with another (spur) toothed wheel of 30 cm diameter. This spur wheel shall be mounted on another axle to which a load drum of about 7.5 cm diameter of heavy C.I. material shall be attached to which the heavy loads can be attached at bottom.

Additional Information:
  • Item Code: CLAM-44

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description

Apparatus that has three or more chains or cables attached to a center ring, The chains or cables exert forces upon the center ring in three different directions.

Two of the forces are acting in two-dimensions.



Additional Information:
  • Item Code: CLAM-01

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description
Young''smodulus and Bulk modulus. Its suitability for metals, plastics,polymers and crystals etc makes it versatile tool for Engineering Physics, Material Science andPolymer Science.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description

worm gear of approx. 25 cm diameter, carrying a meta l drum of approx. 12 cm diameter, and machine cut worm on steel spindle carrying a approx. 12 cm diameter pulley. With effort pulley, string and hooks

Types of this apparatus are-Double

Additional Information:
  • Item Code: CLAM-46

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description

1. Experiment On The Moment Of Mass Inertia Of A Flywheel

2. Steel Flywheel

3. Steel Shaft Used As Drive Pulley

4. Set Of Weights

5. Ball Bearing Mounted Shaft

6. Anodised Aluminium Base Plate wall mounted.



Additional Information:
  • Item Code: CLAM-149

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

The machine cut worm on steel spindle carrying a approx. 12 cm diameter pulley. With effort pulley, string and hooks

Types of this apparatus are-Triple



Additional Information:
  • Item Code: CLAM-46A

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Description
The teeth of this pinion wheel shall mesh with another (spur) toothed wheel of 30 cm diameter. This spur wheel shall be mounted on another axle to which a load drum of about 7.5 cm diameter of heavy C.I. material shall be attached to which the heavy loads can be attached at bottom.

Additional Information:
  • Item Code: CLAM-45

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

The set-up is designed to demonstrate and stimulate the moisture removal by heat under forced draft action created by hot air stream and shower of moist solid due to rotary action of dryer drum.

The set-up consists of a long cylindrical shell slightly inclined towards the outlet rotating at low RPM. Counter current hot air from blower passes through heating chamber to produce hot air works as the drying agent entered from one side of the rotating shell and leave from other side removes the moisture from the moist solids. High moisture content feed enters from one end of the shell and low moisture content product discharges from the other end of shell. As the shell rotates internal flights lift the solids and shower them down through the interior of the shell. This action increases the contact of wet solid against hot-air making the dryer very effective.

An arrangement is made to vary and measure the airflow rate. A digital temperature controller is used to control and measure the temperature of air stream

Experiments

  • To study the operation of a Rotary Dryer
  • To study the drying characteristics of a solid material under batch drying condition in a rotary dryer

Features

  • Superb Painted structure
  • Simple to operate & maintain
  • Compact & stand alone set up

Utilities Required

  • Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater
  • Material Saw dust @ 1Kg. Granular and free flowing solid of size I - 2 mm
  • Anemometer Air flow measurement



Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

All metallic construction accurately machine cut screw with V pitch of 5mm carrying double flanged turned table of about 20 cm dia.fitted on a heavy cast iron base and complete with 2 adjustable pulleys, cord and hooks.Complete with all optional accessories.


Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
BrandCREATIVE LAB

Description

A chrome plated steel bar with a number of equidistant holes at equal intervals. Provided with two removable knife edges passing through any one of the holes and with wall bracket.



Additional Information:
  • Item Code: CLAM-150

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

DESCRIPTION:

For demonstrating the concept Parallelogram and polygon law of forces and Lami's theorem about static equilibrium which relates to the magnitudes of three forces-coplanar, concurrent and non-collinear which keep the object in static equilibrium.

This apparatus comprises board of size about 65 x 50cm, with two aluminium pulleys, 50mm diameter, on clamp for mounting on board in any desired position. Comes with three mass hangers and 12 slotted masses, each of 50g each.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

¿¿Technical Specification:

Type CTG-6P/6B CTG-6P/6B Vitrified Wheel Diameter 150 x 25 x 20 mm 200 x 25 x 25 mm Diamond Wheel Diameter 150 x 17 x 20 mm 200 x 25 x 25 mm Depth of Impregnation of Diamond 1.5 mm 1.5

mm Wheel Spindle Dia. 35 mm 40 mm Wheel Spindle Speed RPM 2800 2400 Table Area 385 x 195 mm 385 x 195 mm Main Drive Motor H.P 1 1

Features:

Sturdy built

Corrosion-resistance

Long lasting

Optimum performance

Competitively priced



Additional Information:
  • Item Code: CLPL-21A

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

We are engaged in offering genuine quality Applied Machines to the esteemed customers, as per their specific requirements. These machines are made in compliance with the international quality standards by making judicious utilization of all the available resources in the best possible manner. In addition to this, we offer customized machines to the clients.

 

Offered Features:

  • Universal force table

  • Bell crank lever

  • Jointed roof truss

  • Pulley block

  • Double sleeve pulley block

  • Simple wheel & axle

  • Bending of beam apparatus

  • Shear force apparatus

  • Three stage spur gear model

  • Belt drive single speed model

  • Parallelogram law of forces

  • Polygon law of forces

  • Jib crane

  • Simple supported beam

  • Inclined plane & friction slide apparatus

  • Screw jack

  • Worm & worm wheel

  • First system of pulleys

  • Second system of pulleys

  • Winch crab

 

Material Lab:

  • Metallurgical microscope
  • Metallurgical polishing machine single disc
  • Specimen cut of machine
  • Heat treatment furnace
  • Crucible
  • Set of specimen of different metal
  • Alumina paste grade i, ii, iii
  • Velvet cloth
  • Jomney & quench machine

    Yes! I am Interested


    REQUEST CALLBACK
    Ask for Price

    Price on Request: Get Latest Price

    Description

    Two knife edge end supports, a hanger with knife edge, and a pointer moving Over a graduated scale. Complete with scale pan and two beams, one of iron and the other of wood each beam is approx. 120 cm in length.



    Additional Information:
    • Item Code: CLSL-04

    Yes! I am Interested


    Ask for Price

    Price on Request: Get Latest Price

    DESCRIPTION

    Acrankis an arm attached at right angles to a rotating shaft by whichreciprocating motionis imparted to or received from the shaft. It is used to convertcircular motioninto reciprocating motion, or vice versa. The arm may be a bent portion of the shaft, or a separate arm or disk attached to it. Attached to the end of the crank by a pivot is a rod, usually called aconnecting rod. The end of the rod attached to the crank moves in a circular motion, while the other end is usually constrained to move in alinearsliding motion.


    Yes! I am Interested


     






    Corporate Brochure




     

     

    Send SMS
    Sagar Sharma  (Managing Director)
    Creative Labs
    ,12,Jagadhari Road,,chota khudda Industrial Estate
    Khuda Khurd, Ambala - 133001 , Haryana , India
    Send E-mail
    Share Us:
    X