Chemical Reaction Engineering

Price on Request: Get Latest Price

Description:

In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition.
The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Experimentation:

• To study the progress of a suitable Chemical Reaction CSTR.
•  To determine the Reaction Rate Constant. 

Utility Required:

• Compressed Air Supply at 1 HP, 2 CFM.
• Water Supply.
• Drain.
• Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

 
Technical Detail:

• Reactor: Material Stainless Steel, Capacity 2 Ltrs (Approx).
• Stirrer: Stainless Steel Impeller and shaft coupled with FHP Motor.
• Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rota meter 2Nos. (one each for Reactants).
• Piping: Stainless Steel and PVC.
• Pressure Regulator: 0-2 Kg/cm2
• Pressure Gauge:     Bourdon type 0-2 Kg/cm2
• Stop Watch: Electronic
• Control Panel comprises of: Standard make on off switch, Mains Indicator etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled Continuous Stirred Tank Reactor (With Data Logging Facility)

Description:

In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Peristaltic pumps are provided to measure the individual flow of Chemicals. The flow rate can be varied by changing the speed of peristaltic pump. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by CL Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To study the progress of a suitable Chemical Reaction CSTR.
• To determine the Reaction Rate Constant.

Utilities Required:

• Water Supply.
• Floor Drain.
• Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Stainless Steel, Capacity 2 Ltrs (Approx).
• Stirrer: Stainless Steel Impeller and shaft coupled with FHP Motor.
• Feed Tank: Material Stainless Steel (2Nos.), Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (2Nos.), Computer controlled for different RPM
• Piping: Stainless Steel and PVC.
• Product Analysis: By using Electronic Sensor (1No.), Output 4-20 mA.
• Control Panel comprises of: Standard make on off switch, Mains Indicator etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Computer Controlled Isothermal Continuous Stirred Tank Reactor (With Data Logging Facility)

Description:

In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under isothermal condition. The  set  up  consists  of  two  feed  tanks  through  which  two reactants are fed to the reactor. The flow rate can be varied by changing  the  speed  of  peristaltic  pump.  The  CSTR  is  fitted  with  stirrer  for  proper  mixing.  Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• Sponification Reaction study in Isothermal CSTR.
• To determine the Reaction Rate Constant and effect of temperature on it.

Utilities Required:
 

• Water Supply.
• Floor Drain.
• Electricity Supply : 1 Phase, 220 V AC, 1.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System : Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Stainless Steel, volume 2Ltr (Approx).
• Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool.
• Heater: Nichrome wire Heater with Control Unit to control heat input.
• Agitator: Material Stainless Steel Impeller and shaft coupled with FHP motor with and Control Unit for variable speed (RPM 50-350 approx.)
• Feed Tank: Material Stainless Steel (2Nos.), Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (2Nos.), computer controlled for different RPM
• Piping: Stainless Steel and PVC.
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Temp. Measurement: By temperature transmitter (1No.), (0-200°C)
• Control panel comprises of: With Standard make on/off switch, Mains Indicator etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Computer Controlled - Cascade Continuous Stirred Tank Reactor (With Data Logging Facility)

Description:

In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition. The setup consists of three CSTR arranged in series and two feed tanks through which two reactants are fed to the reactor. The flow rate can be varied by changing the speed of peristaltic pump. Reactants from feed tanks enter in the first CSTR and are passed to second CSTR and so on.The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C.L.. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To study the performance of Cascade of three equal volumes CSTR's in series for the sponification of a reaction.
• To draw the performance chart for the reactor system and evaluate the reaction rate constant at ambient condition.

Utilities Required:

• Water Supply.
• Floor Drain.
• Electricity Supply : 1 Phase, 220 V AC, 0.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System : Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:   
   

• Reactor (3Nos.): Material Stainless Steel, Capacity 1 Ltr.(Approx)
• Agitator: Material Stainless Steel Impeller and shaft coupled with FHP motor and Control Unit for variable speed.
• Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (2Nos.), Computer controlled for different RPM
• Piping: Stainless Steel and PVC
• Product Analysis: By using Electronic Sensor (3Nos.), Output 4-20 mA.
• Control Panel comprising of: Standard make on/off switch, Mains Indicator etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. This set-up is used to study a non-catalytic homogeneous reaction under ambient condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. A straight tube type reactor kept horizontally and inclined upward at outlet from where samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Experimentation:

• Sponification Reaction Study in straight tube Plug Flow Reactor.
• To determine Reaction Rate Constant.

Utility Required:

• Compressed Air Supply at 2 Bar, 0.5 CFM.
• Water Supply.
• Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Technical Detail:

• Reactor:  Material Borosilicate Glass, OD-32mm, ID-25mm, Length-1200mm
• Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter 2 Nos. (One each for Reactants).
• Piping: Stainless Steel and PVC
• Pressure Regulator: 0-2 Kg/cm2.
• Pressure Gauge: Bourdon type 0-2 Kg/cm2.
• Stop Watch: Electronic.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled - Plug Flow Tubular Reactor  (Straight Tube Type)  (With Data Logging Facility)

Description:

In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. This set-up is used to study a non-catalytic homogeneous reaction under ambient condition.The set up consists of two feed tanks through which two reactants  are  fed  to  the  reactor.  Peristaltic  pumps  are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating respective Peristaltic pumps. A straight tube type reactor kept horizontally and inclined upward at outlet from where samples are collected for analysis.The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• Sponification Reaction Study in straight tube Plug Flow Reactor.
• To determine Reaction Rate Constant.

Utilities Required:

• Water Supply.
• Floor Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Borosilicate Glass,OD-32mm, ID-25mm, Length-1200mm
• Feed Tank (2Nos.): Material Stainless Steel (2Nos.), Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (2Nos.),Computer controlled for different RPM
• Piping: Stainless Steel and PVC.
• Product Analysis: By using Electronic Sensor (1No.), Output 4-20 mA.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. This set-up is used to study a non-catalytic homogeneous reaction under ambient condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. Samples are collected for analysis from the outlet of reactor. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Experimentation:

• Sponification Reaction Study in straight tube Plug Flow Reactor.
• To determine Reaction Rate Constant.

Utility Required:

• Compressed Air Supply at 2 Bar, 0.5 CFM.
• Water Supply.
• Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Technical Detail:

• Reactor: Material Stainless Steel, OD-16mm, ID-13mm approx.
• Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter 2 Nos. (one each for Reactants).
• Piping: Stainless Steel and PVC
• Pressure Regulator: 0-2 Kg/cm2.
• Pressure Gauge: Bourdon type 0-2 Kg/cm2.
• Stop Watch: Electronic.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled - Plug Flow Tubular Reactor (Coiled Tube Type) (With Data Logging Facility)

Description:

In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. This set-up is used to study a non-catalytic homogeneous reaction under ambient condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Peristaltic pumps are provided to measure the individual flow of Chemicals. The flow rate can be varied by changing the speed of peristaltic pump. Samples are collected for analysis from the outlet of reactor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• Sponification Reaction Study in straight tube Plug Flow Reactor.
• To determine Reaction Rate Constant.

Utilities Required:

• Water Supply.
• Floor Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:   
   

• Reactor: Material Stainless Steel, (0.6-0.7) Ltrs approx.
• Feed Tank: Material Stainless Steel (2Nos.), Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (2Nos.),Computer controlled for different RPM
• Piping: Stainless Steel and PVC.
• Product Analysis: By using Electronic Sensor (1No.), Output 4-20 mA.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. It is a helical coil tube type reactor kept in a constant temperature water bath to conduct the experiment at various temperatures. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Experimentation:

• Sponification Reaction study in Isothermal Plug Flow Reactor.
• To determine Reaction Rate Constant and effect of temperature on it.

Utility Required:

• Compressed Air Supply at 2 Bar, 0.5 CFM.
• Water supply and drain.
• Electricity-1.5kw, Single.
• Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.

Technical Detail:

• Reactor: Material Stainless Steel, Capacity 0.7 Ltrs. (approx) (Helical Coiled Tube Type)
• Water Bath: Material Stainless Steel, Double wall, insulated with CeramicWool.
• Heater: Nichrome wire Heater
• Stirrer (Water Bath): Material SS Impeller and shaft coupled with FHP motor
• Feed Tank (2Nos.): Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter 2Nos. one each for Reactants
• Piping: Stainless Steel and PVC.
• Pressure Regulator: 0-2 Kg/cm2
• Pressure Gauge: Bourdon type 0-2 Kg/cm2
• Stop Watch: Electronic
• Temp. Sensor: RTD PT-100 type
• Control panel comprises of Standard make on/off switch, Mains Indicator etc.
• Digital Temp. Controller: 0-200°C, RTD PT-100 type (For Water Bath)
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled - Isothermal Plug Flow Tubular Reactor (Coiled Tube Type) (With Data Logging Facility)

Description:

In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Peristaltic pumps are provided to measure the individual flow of Chemicals. The flow rate can be varied by changing the speed of peristaltic pump. It is a helical coil tube type reactor kept in a constant temperature water bath to conduct the experiment at various temperatures. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis.The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• Sponification Reaction study in Isothermal Plug Flow Reactor.
• To determine Reaction Rate Constant and effect of temperature on it.

Utilities Required:

• Water Supply
• Floor Drain.
• Electricity-1.5kw, Single.
• Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Stainless Steel, Capacity (0.6-0.7) Ltrs. (approx)(Helical Coiled Tube Type)
• Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool.
• Heater: Nichrome wire Heater, with Control Unit to control heat input.
• Stirrer (Water Bath): Material SS Impeller and shaft coupled with FHP motor
• Feed Tank (2Nos.): Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (2Nos.), computer controlled for different RPM
• Piping:    Stainless Steel and PVC.
• Product Analysis: By using Electronic Sensor (1No.), Output 4-20 mA.
• Temp. Measurement: Temp. transmitter(1No.) 0-200°C
• Control panel comprises of: Standard make on/off switch, Mains Indicator etc.
• Digital Temp. Controller: PID Controller, 0-200°C, (For Water Bath)
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

A batch reactor is a closed system with no input and output streams. A batch reactor can operate under conditions like Isothermal (Temperature of Reaction Mass remains constant), Perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90C with the help of Digital Temperature indicator Cum Controller. Samples can be taken out with the help of a sampling pipette.

Experimentation:

• To study the progress of a Chemicals reaction and determine the kinetic parameters.
• To determine the effect of temperature on Reaction Rate Constant.

Utility Required:

• Water Supply.
• Drain.
• Electricity Supply: 1 Phase, 220 V AC, 1.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Technical Detail:

• Reactor: Material Stainless Steel, Volume- 1 Ltrs. (Approx.)
• Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool.
• Heater:    Nichrome wire Heater
• Stirrer (2 Nos.): Stainless Steel Impeller and shaft coupled with FHP motor.
• Stop Watch: Electronic
• Temp. Sensor: RTD PT-100 type
• Control panel comprises of: Digital Temp. Controller: 0-199.9°C, (For Water Bath)
• With Standard make on/off switch, Mains Indicator fuses etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled – Isothermal Batch Reactor (With Data Logging Facility)

Description:

A batch reactor is a closed system with no input and output streams. A batch reactor can operate under conditions like Isothermal (Temperature of Reaction Mass remains constant), Perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90°C with the help of Digital Temperature indicator Cum Controller.The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To study the progress of a Chemicals reaction and determine the kinetic parameters.
• To determine the effect of temperature on Reaction Rate Constant.

Utilities Required:

• Water Supply.
• Floor Drain.
• Electricity Supply : 1 Phase, 220 V AC, 1.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System : Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Stainless Steel, Volume- 2 Ltrs. (Approx.)
• Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool.
• Heater: Nichrome wire Heater, with Control Unit to control heat input.
• Agitator: Material Stainless Steel Impeller and shaft coupled with FHP motor
• Stirrer: Stainless Steel Impeller and shaft coupled with FHP motor.
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Temp. Measurement: By temperature transmitter (1No.), (0-200°C)
• Control panel comprises of: With Standard make on/off switch, Mains Indicator fuse etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

A isothermal semi-batch reactor is a semi-closed system with one input stream. It is operated under conditions like Isothermal (Temperature of Reaction Mass remains constant) and perfectly mixed (composition of reaction mixture is uniform throughout). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. Before starting the reaction the reactor is charged with measured quantity of one reactant. From a feed tank another reactant is fed to the reactor. Using a sampling pipette samples can be taken out for analysis after fixed interval. Rotameter is provided to measure the flow of Chemicals. The compressed air is used for circulation of feed. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 70 OC with the help of Digital Temperature indicator Cum Controller. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Experimentation:

• To study a second order sponification reaction in a Semi-Batch Reactor.
• To determine the Reaction Rate Constant.

Utility Required:

• Compressed Air Supply at 2 Bar, 0.25 CFM.
• Water supply and drain.
• Electricity-1.5kw, Single Phase.
• Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.

Technical Detail:

• Reactor: Material Stainless Steel, Capacity 3 Ltrs. (approx).
• Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool.
• Heater: Nichrome wire Heater
• Stirrer: Material Stainless Steel Impeller and shaft coupled with FHP motor
• Feed Tank (1Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter.
• Piping: Material Stainless Steel and PVC.
• Pressure Regulator: 0-2 Kg/cm2
• Pressure Gauge: Bourdon type 0-2 Kg/cm2
• Stop Watch: Electronic
• Temp. Sensor: RTD PT-100 type
• Control panel comprises of: Digital Temp. Controller: 0-199.9°C, RTD PT-100 type (For Water Bath)
• With Standard make on/off switch, Mains Indicator etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled - Isothermal Semi- Batch Reactor (With Data Logging Facility)

Description:

A isothermal semi-batch reactor is a semi-closed system with one input stream. It is operated under conditions like Isothermal (Temperature of Reaction Mass remains constant) and perfectly mixed (composition of reaction mixture is uniform throughout). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. Before starting the reaction the reactor is charged with measured quantity of one reactant. From a feed tank another reactant is fed to the reactor. Using a sampling pipette samples can be taken out for analysis after fixed interval. Peristaltic pump is provided to measure the flow of Chemicals. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 70°C with the help of Digital Temperature Controller. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To study a second order sponification reaction in a Semi-Batch Reactor.
• To determine the Reaction Rate Constant.

Utilities Required:

• Water Supply
• Floor Drain.
• Electricity-1.5kw, Single.
• Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded.
• One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Stainless Steel, Capacity 2 Ltrs. (approx).
• Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool.
• Heater: Nichrome wire Heater with Control Unit to control heat input.
• Stirrer: Material Stainless Steel Impeller and shaft coupled with FHP motor
• Feed Tank (1Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (2Nos.), Computer controlled for different RPM
• Piping:    Stainless Steel and PVC.
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Temp. Measurement: Temperature transmitter (1No.), 0-199.9°C
• Control panel comprises of: Digital Temp. Controller: PID Controller, 0-199.9°C, (For Water Bath)
• With Standard make on/off switch, Mains Indicator etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

An adiabatic batch reactor is a closed system with no input and output streams. This reactor is operated under conditions like adiabatic (Temperature of Reaction Mass keep on changing), perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a catalytic homogeneous reaction under adiabatic condition. The set-up consists of a Dewar flask of capacity 1 lit. fitted with a stirrer. The flask is double insulated by ceramic wool insulation. Temp. is measured by digital temp indicator. The whole setup is mounted on a rigid M.S. frame.

Experimentation:

• To study the hydrolysis of acetic anhydride with water in presence of an acid catalyst (H2SO4).
• To predict the degree of conversion from time-temperature data.

Utility Required:

• Instruments, Laboratory wares
• Chemicals required for analysis as per the system adopted.

Technical Detail:

• Reactor: Material Stainless Steel, Capacity 1 Ltrs. (Approx) Insulated with Ceramic wool.
• Stirrer: Teflon Impeller and Stainless Steel shaft coupled with FHP motor
• Control panel comprises of: Digital Temp.
• Indicator: 0-199.9°C, RTD PT-100 type
• Temp. Sensors: RTD PT-100 type
• With Standard make on/off switch, Mains Indicator etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled - Adiabatic Batch Reactor (With Data Logging Facility)

Description:

An adiabatic batch reactor is a closed system with no input and output streams. This reactor is operated under conditions like adiabatic (Temperature of Reaction Mass keep on changing), Perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a catalytic homogeneous reaction under adiabatic Condition. The set-up consists of a Dewar flask of capacity 1 lit. fitted with a stirrer. The flask is double insulated by ceramic wool insulation. Temp. is measured by digital temp indicator. The whole setup is mounted on a rigid M.S. frame. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To study the hydrolysis of acetic anhydride with water in presence of an acid catalyst (H2SO4).
• To predict the degree of conversion from time-temperature data.

Utilities Required:

• Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded.
• One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Stainless Steel, Capacity 1 Ltrs. (Approx) Insulated with Ceramic wool.
• Agitator: Material Stainless Steel Impeller and shaft coupled with FHP motor and Control Unit for variable speed
• Temp. Measurement: Temperature transmitter (1No), 0-199.9°C
• Control panel comprises of: With Standard make on/off switch, Mains Indicator etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

The setup consists of a glass column packed with Rasching Rings and two feed tanks. Reactants are fed to the reactor through liquid distributor, fitted at the bottom of the column. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. Samples can be taken periodically from the top outlet of reactor. Pressure Regulator & Pressure Gauge are fitted in the compressed air line.

Experimentation:

• Sponification Reaction studies in Packed Bed Reactor
• To determine the Reaction Rate Constant

Utility Required:

• Compressed Air Supply at 2 Bar, 0.5 CFM
• Water Supply.
• Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

Technical Detail:

• Reactor Column: Material Borosilicate Glass
• Volume: 1.5 Ltrs. (approx).
• Packing: Rasching Rings, Material Borosilicate Glass
• Size: 6-8 mm (approx)
• Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter 2Nos. (one each for Reactants)
• Piping: Stainless Steel and PVC
• Pressure Regulator: 0-2 Kg/cm2
• Pressure Gauge: Bourdon type 0-2 Kg/cm2
• Stop Watch: Electronic.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a Panel plate and mounted on a stand.
• Most of the parts are powder coated and rest is painted with auto paints.

Price on Request: Get Latest Price

Description:

The setup consists of a glass column packed with Rasching Rings and two feed tanks. Reactants are fed to the reactor through liquid distributor, fitted at the bottom of the column. Peristaltic Pumps are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the respective Peristaltic Pump. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by CL Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• Sponification Reaction studies in Packed Bed Reactor.
• To determine the Reaction Rate Constant.

Utilities Required:

• Water Supply.
• Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded.
• One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details
       

• Reactor Column: Material Borosilicate Glass, Volume 1.2 Ltrs. (approx).
• Packing: Rasching Rings, Material Borosilicate Glass.
• Size: 6-8 mm (approx)
• Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (2 Nos.)
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

The setup consists of a Reactor in which solid cylinder of Benzoic Acid is placed and water is stirred by means of a variable speed mixer. Baffles are also provided. The Reactor is made of Stainless Steel. A Peltilizer is provided to make the solid cylinder of size 1" diameter and 2" height of Benzoic Acid.

Experimentation:

• To study the Kinetics of dissolution of Benzoic Acid.

Utility Required:

• Water Supply.
• Drain.
• Electricity Supply : 1 Phase, 220 V AC, 0.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Technical Detail:

• Chamber: Material Stainless Steel, Capacity 1 Ltrs. (approx)
• Peltilizer: 1" Diameter, 2" Height (approx).
• Stirrer: Material Stainless Steel Impeller and shaft coupled with FHP motor
• Control panel comprises of: With Standard make on/off switch, Mains Indicator etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rests are painted with auto paints. 

Price on Request: Get Latest Price

Kinetics Of Dissolution Of Benzoic Acid (With Data Logging Facility)

Description:

The setup consists of a Reactor in which solid cylinder of Benzoic Acid is placed and water is stirred by means of a variable speed mixer. Baffles are also provided. The Reactor is made of Stainless Steel. A Peltilizer is provided to make the solid cylinder of size 1" diameter and 2" height of Benzoic Acid. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To study the Kinetics of dissolution of Benzoic Acid.

Utilities Required:

• Water Supply.
• Floor Drain.
• Electricity Supply : 1 Phase, 220 V AC, 0.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System : Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Chamber: Material Stainless Steel, Capacity 1 Ltrs. (approx)
• Peltilizer: 1" Diameter, 2" Height (approx).
• Stirrer: Material Stainless Steel Impeller and shaft coupled with FHP motor
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Control panel comprises of: With Standard make on/off switch, Mains Indicator etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behaviour of a vessel as a Chemicals reactor, RTD or stimulus response technique is used.
The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be adjusted by operating the needle valve and measured by Rotameter. The compressed air is used for circulation of feed. The continuously stirred tank reactor made of Stainless Steel is provided for understanding the R.T.D. characteristics. Pressure Regulator & Pressure Gauge are fitted in the compressed air line.

Experimentation:

• To plot RTD curve for a CSTR. Using pulse tracer.
• To determine the Dispersion No.

Utility Required:

• Compressed Air Supply at 1 HP, 2 CFM.
• Water Supply.
• Drain.
• Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted. 

Technical Detail:

• Reactor: Material Stainless Steel, Capacity 2 Ltrs. (approx.)
• Stirrer: Material Stainless Steel Impeller and shaft coupled with FHP motor
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter.
• Piping: Stainless Steel and PVC.
• Pressure Regulator: 0-2 Kg/cm2
• Pressure Gauge: Bourdon type 0-2 Kg/cm2
• Stop Watch: Electronic
• Control panel comprises of: With Standard make on/off switch, Mains Indicator etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled - Rtd Studies In Continuous Stirred Tank Reactor (With Data Logging Facility)

RTD Reactions:

Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be varied by changing the speed of peristaltic pump. The continuously stirred tank reactor made of Stainless Steel is provided for understanding the R.T.D. characteristics. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To plot RTD curve for a CSTR. Using pulse tracer.
• To determine the Dispersion No.

Utilities Required:

• Water Supply.
• Floor Drain.
• Electricity Supply : 1 Phase, 220 V AC, 0.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System : Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Stainless Steel, variable volume 2Ltr (Approx)
• Agitator: Material Stainless Steel Impeller and shaft coupled with FHP motor and Control Unit for variable speed
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (1No.), Computer controlled for different RPM
• Piping:    Stainless Steel and PVC.
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Control panel comprises of: With Standard make on/off switch, Mains Indicator etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behaviour of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be adjusted by operating the needle valve and measured by Rotameter. The compressed air is used for circulation of feed. It is a helical coil tube type plug flow reactor made up of Stainless steel pipe. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is provided. Pressure Regulator & Pressure Gauge are fitted in the compressed air line.

Experimentation:

• To plot RTD curve for Plug Flow Reactor
• To determine the Dispersion No.

Utility Required:

• Compressed Air Supply at 1 HP, 2 CFM.
• Water Supply.
• Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted. 

Technical Detail:

• Reactor: Material Stainless Steel, Capacity 0.7 Ltrs. (Approx) (Helical Coiled Tube Type)
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter.
• Piping: Material Stainless Steel and PVC.
• Pressure Regulator: 0-2 Kg/cm2
• Pressure Gauge: Bourdon type 0-2 Kg/cm2
• Stop Watch: Electronic
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rests are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled - Rtd Studies In Plug Flow  Tubular Reactor (With Data Logging Facility)

RTD Reactions:

Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be changed by varying the speed of peristaltic pump. It is a straight tube type plug flow reactor made up of glass. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is provided. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by CL. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To plot RTD curve for Plug Flow Reactor
• To determine the Dispersion No.

Utilities Required:

• Water Supply.
• Floor Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:   
   

• Reactor: Material Borosilicate Glass, Capacity (0.6-0.7) Ltrs approx.
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By Peristaltic Pump (1No.), Computer controlled for different RPM
• Piping: Material Stainless Steel and PVC.
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Tracer Injection: Special arrangement will be provided with syringe
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint

Price on Request: Get Latest Price

Description:

Axial diffusion and dispersion of fluid in packed beds are important for design and operation of separation equipment and Chemicals reactors. The tracer technique, the most widely used method for the study of axial dispersion. In stimulus response experimentation, we perturb the system using pulse input of tracer and then see how the system reacts or responds to this stimulus. The analysis of the response gives the desired information about the system. The setup consists of a glass column packed with Rasching Rings and one feed tank. Water is fed to the reactor through liquid distributor, fitted at the bottom of the column. Rotameter is provided to measure the flow of water. The flow rate can be adjusted by operating the needle valve provided on Rotameter. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe, is provided. Samples can be taken periodically from the top outlet of reactor. Pressure Regulator & Pressure Gauge are fitted in the compressed air line.

Experimentation:

• To plot RTD curve for Packed Bed Reactor.
• To determine the Dispersion No.

Utility Required:

• Compressed Air Supply at 2 Bar, 0.25 CFM.
• Water Supply.
• Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Technical Detail:

• Reactor Column: Material Borosilicate Glass
• Packing: Rasching Rings, Material Borosilicate Glass.
• Size: 8-10mm (approx)
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter.
• Piping: Stainless Steel and PVC.
• Pressure Regulator: 0-2 Kg/cm2
• Pressure Gauge: Bourdon type 0-2 Kg/cm2
• Stop Watch: Electronic
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Computer Controlled Rtd Studies In Packed Bed Reactor (With Data Logging Facility)

RTD Reactions:

Axial diffusion and dispersion of fluid in packed beds are important for design and operation of separation equipment and Chemicals reactors. The tracer technique, the most widely used method for the study of axial dispersion. In stimulus response experimentation, we perturb the system using pulse input of tracer and then see how the system reacts or responds to this stimulus. The analysis of the response gives the desired information about the system. The setup consists of a glass column packed with Rasching Rings and one feed tank. Water is fed to the reactor through liquid distributor, fitted at the bottom of the column. Peristaltic Pump is provided to measure the flow of water. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe, is provided. Samples can be taken periodically from the top outlet of reactor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To plot RTD curve for Packed Bed Reactor.
• To determine the Dispersion No.

Utilities Required:

• Water Supply.
• Floor Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor Column: Material Borosilicate Glass capacity 1.2 Ltrs approx.
• Packing: Rasching Rings, Material Borosilicate Glass.
• Size 8-10mm (approx)
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Piping: Stainless Steel and PVC.
• Flow Measurement: Peristaltic Pumps,(1No)
• (for water) Computer controlled for different RPM
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Stop Watch: Electronic
• Tracer Injection: Special arrangement will be provided with syringe
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Computer Controlled Rtd Studies In Packed Bed Reactor (With Data Logging Facility)

RTD Reactions:

Axial diffusion and dispersion of fluid in packed beds are important for design and operation of separation equipment and Chemicals reactors. The tracer technique, the most widely used method for the study of axial dispersion. In stimulus response experimentation, we perturb the system using pulse input of tracer and then see how the system reacts or responds to this stimulus. The analysis of the response gives the desired information about the system. The setup consists of a glass column packed with Rasching Rings and one feed tank. Water is fed to the reactor through liquid distributor, fitted at the bottom of the column. Peristaltic Pump is provided to measure the flow of water. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe, is provided. Samples can be taken periodically from the top outlet of reactor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To plot RTD curve for Packed Bed Reactor.
• To determine the Dispersion No.

Utilities Required:

• Water Supply.
• Floor Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor Column: Material Borosilicate Glass capacity 1.2 Ltrs approx.
• Packing: Rasching Rings, Material Borosilicate Glass.
• Size 8-10mm (approx)
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Piping: Stainless Steel and PVC.
• Flow Measurement: Peristaltic Pumps,(1No)
• (for water) Computer controlled for different RPM
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Stop Watch: Electronic
• Tracer Injection: Special arrangement will be provided with syringe
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Computer Controlled Rtd Studies In Packed Bed Reactor (With Data Logging Facility)

RTD Reactions:

Axial diffusion and dispersion of fluid in packed beds are important for design and operation of separation equipment and Chemicals reactors. The tracer technique, the most widely used method for the study of axial dispersion. In stimulus response experimentation, we perturb the system using pulse input of tracer and then see how the system reacts or responds to this stimulus. The analysis of the response gives the desired information about the system. The setup consists of a glass column packed with Rasching Rings and one feed tank. Water is fed to the reactor through liquid distributor, fitted at the bottom of the column. Peristaltic Pump is provided to measure the flow of water. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe, is provided. Samples can be taken periodically from the top outlet of reactor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To plot RTD curve for Packed Bed Reactor.
• To determine the Dispersion No.

Utilities Required:

• Water Supply.
• Floor Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor Column: Material Borosilicate Glass capacity 1.2 Ltrs approx.
• Packing: Rasching Rings, Material Borosilicate Glass.
• Size 8-10mm (approx)
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Piping: Stainless Steel and PVC.
• Flow Measurement: Peristaltic Pumps,(1No)
• (for water) Computer controlled for different RPM
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Stop Watch: Electronic
• Tracer Injection: Special arrangement will be provided with syringe
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Computer Controlled Rtd Studies In Packed Bed Reactor (With Data Logging Facility)

RTD Reactions:

Axial diffusion and dispersion of fluid in packed beds are important for design and operation of separation equipment and Chemicals reactors. The tracer technique, the most widely used method for the study of axial dispersion. In stimulus response experimentation, we perturb the system using pulse input of tracer and then see how the system reacts or responds to this stimulus. The analysis of the response gives the desired information about the system. The setup consists of a glass column packed with Rasching Rings and one feed tank. Water is fed to the reactor through liquid distributor, fitted at the bottom of the column. Peristaltic Pump is provided to measure the flow of water. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe, is provided. Samples can be taken periodically from the top outlet of reactor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To plot RTD curve for Packed Bed Reactor.
• To determine the Dispersion No.

Utilities Required:

• Water Supply.
• Floor Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor Column: Material Borosilicate Glass capacity 1.2 Ltrs approx.
• Packing: Rasching Rings, Material Borosilicate Glass.
• Size 8-10mm (approx)
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Piping: Stainless Steel and PVC.
• Flow Measurement: Peristaltic Pumps,(1No)
• (for water) Computer controlled for different RPM
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Stop Watch: Electronic
• Tracer Injection: Special arrangement will be provided with syringe
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Computer Controlled Rtd Studies In Packed Bed Reactor (With Data Logging Facility)

RTD Reactions:

Axial diffusion and dispersion of fluid in packed beds are important for design and operation of separation equipment and Chemicals reactors. The tracer technique, the most widely used method for the study of axial dispersion. In stimulus response experimentation, we perturb the system using pulse input of tracer and then see how the system reacts or responds to this stimulus. The analysis of the response gives the desired information about the system. The setup consists of a glass column packed with Rasching Rings and one feed tank. Water is fed to the reactor through liquid distributor, fitted at the bottom of the column. Peristaltic Pump is provided to measure the flow of water. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe, is provided. Samples can be taken periodically from the top outlet of reactor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To plot RTD curve for Packed Bed Reactor.
• To determine the Dispersion No.

Utilities Required:

• Water Supply.
• Floor Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor Column: Material Borosilicate Glass capacity 1.2 Ltrs approx.
• Packing: Rasching Rings, Material Borosilicate Glass.
• Size 8-10mm (approx)
• Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
• Piping: Stainless Steel and PVC.
• Flow Measurement: Peristaltic Pumps,(1No)
• (for water) Computer controlled for different RPM
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Stop Watch: Electronic
• Tracer Injection: Special arrangement will be provided with syringe
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Computer Controlled - Adiabatic Batch Reactor (With Data Logging Facility)

Homogeneous reaction:

An adiabatic batch reactor is a closed system with no input and output streams. This reactor is operated under conditions like adiabatic (Temperature of Reaction Mass keep on changing), Perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a catalytic homogeneous reaction under adiabatic Condition. The set-up consists of a Dewar flask of capacity 1 lit. fitted with a stirrer. The flask is double insulated by ceramic wool insulation. Temp. is measured by digital temp indicator. The whole setup is mounted on a rigid M.S. frame. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To study the hydrolysis of acetic anhydride with water in presence of an acid catalyst (H2SO4).
• To predict the degree of conversion from time-temperature data.

Utilities Required:

• Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Stainless Steel, Capacity 1 Ltrs. (Approx) Insulated with Ceramic wool.
• Agitator: Material Stainless Steel Impeller and shaft coupled with FHP motor and Control Unit for variable speed
• Temp. Measurement: Temperature transmitter (1No), 0-199.9°C
• Control panel comprises of: With Standard make on/off switch, Mains Indicator etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Computer Controlled - Annular Uv Photo Reactor (With Data Logging Facility)

Photo catalytic reaction:

The set-up is used to study a photo catalytic reaction using a UV source provided in the form of an UV tube. This set-up can be used to carry out a parameter study under batch/continuous flow condition. A photo catalyst like TiO2 can be used. This set-up can also be used to study the mineralization of liquid effluent industrial streams & for purification of water. The set-up consists of reactor with inside reflecting surface. An UV source surrounding glass/quartz cylinder is placed centrally in the reactor. The educational software and data –logging package has been developed for this unit. It is compatible to interfacing unit designed by CL Engineers. It provides a comprehensive educational software environment within which the investigations can be performed. This software runs in Windows XP. It is capable to tabulate the samples readings according to requirement of experiment under study and results obtained can be compared. Interfacing the set up with computer using software can do the real time data acquisition. Data can be transferred in Excel Files for further calculations, plotting graphs etc. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Utilities Required:

• Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection.
• Floor Area Required: 1 m x 1 m
• Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.
• Computer P IV, with DVD drive, Windows XP and MS Office XP version preloaded.
• One USB slot free for hardware.

Technical Details:
       

• UV Source: 30 W / 16 W
• Reactor: With inside reflective surface.
• Effective volume of reactor 1-1.5 Ltrs.
• Feed Tank: Material Stainless Steel, Capacity 5 Ltrs.
• Flow circulation: By Peristaltic Pump (1No.),Computer controlled for different RPM
• Product analysis: Conductivity transmitter (4-20 mA)
• Control panel comprising of: Standard make on off switch, Mains Indicator, fuse, power supply to UV source etc.
• Sampling points are provided at inlet & outlet of reactant line.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Computer Controlled - Recycle Bed Reactor (With Data Logging Facility)

Catalytic Reaction:

The setup consists of catalyst packed column of Stainless Steel. Reactant from a fed tank is fed to the reactor through liquid distributor, fitted at one end of the column. Some part of product is recycled to the reactor using peristaltic pump. Peristaltic Pumps are provided to measure the individual flow of feed & recycled product. The feed rate and recycle product ratio can be manipulated by the Peristaltic Pumps. Samples can be taken periodically from the top outlet of reactor at another end. An arrangement is made to carry out the reaction at Isothermal conditions by circulating the hot water in the outer jacket of the packed bed reactor. Special care is taken for proper mixing of feed & recycle product before its entry to the reactor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To determine the Reaction Rate Constant.

Utilities Required:

• Water Supply.
• Floor Drain.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:   
   

• Reactor Column: Material Stainless Steel Diameter 1”, Length: 500mm (approx).
• Packing: Catalyst (Fluid Bed Type)
• Feed Tank (1Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Flow Measurement: By Peristaltic Pump (2Nos.),Computer controlled for different RPM
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Piping: Stainless Steel and PVC. Size ¼”
• Hot water tank: Made of Stainless steel, Double wall, insulated with Ceramic Wool. Capacity: 10-15 ltrs.
• Hot water Circulation: Magnetic Pump of Poly propylene to circulate Hot
• (in outer Jacket) Water, maximum working temp. 85°C
• Heater: Nichrome wire Heater with Control Unit to control heat input.
• Control panel comprising of: Digital Temp. Controller: PID Controller, 0-200°C (For Hot Water Tank)
• With Standard make On/Off switch, Mains Indicator & fuse etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Catalytic reaction:

Any catalytic liquid-liquid or liquid-gas reaction involving the use of a catalyst placed in basket can be studies in this set-up. Kinetic parameter of a specific reaction can be estimated & parametric studies can be conducted. The set-up consists of a reactor centrally having one spinning basket derived through a variable speed motor. The metered flow of reactant from feed tank is fed to the reactor at the bottom. The set-up can be used as batch wise of as continuous type. Sampling points are provided for analysis. Port connection for gas inlet is provided at the bottom of the reactor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• To determine the kinetic parameters for a given reaction.

Utilities Required:

• Water Supply.
• Floor Drain.
• Power Supply : 0.5 kW, Single Phase.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System : Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor Vessel:    Material Stainless Steel,  Effective Volume : 1000 ml.
• Basket:    Material Stainless Steel, Fitted with appropriate Stainless Steel.
• Drive for Basket: DC Motor with Thyristor controlled DC Drive for Variable Speed.
• Packing: Catalyst
• Feed Tank (1Nos.): Material Stainless Steel, Capacity - 10 Ltrs.
• Flow Measurement: Peristaltic Pumps, 1No. for feed
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Receiver: Material Stainless Steel, Capacity 10 Ltrs.
• Piping:    Stainless Steel and PVC. Size ¼”
• Hot water Circulation:    Magnetic Pump of Poly propylene to circulate Hot
• (in outer Jacket) Water maximum working temp. 850 C
• Hot water tank:    Made of Stainless Steel, Double wall, insulated with Ceramic Wool
• Capacity : 10-15 ltrs.
• Heaters    : Nichrome wire heater 750-1000 W approx.
• Control panel comprising of:       
• PID Controller    : 0-200°C (For Hot Water Tank)
• Digital Temp. Indicator    : 0-200°C with multi-channel switch.
• Temperature Measurement    : Temp. Transmitter 0-200°C
• RPM Indicator: Digital, Non-Contact Type.
• With Standard make On/Off switch, Mains Indicator & fuse etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Experimentation:

• Sponification Reaction study in Isothermal CSTR.
• To determine the Reaction Rate Constant and effect of temperature on it.

Utility Required:

• Compressed Air Supply at 2 Bar, 0.5 CFM.
• Water Supply.
• Drain.
• Electricity Supply: 1 Phase, 220 V AC, 1.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

 
Technical Detail:

• Reactor: Material Stainless Steel, Capacity 2 Ltrs. (Approx).
• Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool
• Heater: Nichrome wire Heater
• Stirrer (2Nos.): Stainless Steel Impeller and shaft coupled with FHP motor. (One each for Water Bath and Reactor).
• Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter - 2 Nos. one each for Reactants.
• Piping: Stainless Steel and PVC.
• Pressure Regulator: 0-2 Kg/cm2
• Pressure Gauge: Bourdon type 0-2 Kg/cm2
• Stop Watch: Electronic
• Temp. Sensor: RTD PT-100 type Control panel comprises of: Digital Temp.
• Controller: 0-199.9°C (For Hot Water Bath) With Standard make on/off switch, Mains Indicator etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rests are painted with auto paints.

Price on Request: Get Latest Price

Description:

In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition. The setup consists of three CSTR arranged in series and two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. Reactants from feed tanks enter in the first CSTR and are passed to second CSTR and so on. For analysis samples are collected from different ports provided. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Experimentation:

• To study the performance of Cascade of three equal volumes CSTR's in series for the sponification of a reaction.
• To draw the performance chart for the reactor system and evaluate the reaction rate constant at ambient condition.

Utility Required:

• Compressed Air Supply at 2 Bar, 0.5 CFM.
• Water Supply.
• Drain.
• Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Technical Detail:

• Reactor (3Nos.): Material Stainless Steel, Capacity 1 Ltr.(Approx)
• Stirrer (3Nos.): Stainless Steel Impeller and shaft coupled with FHP Motor.
• Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed Circulation: By compressed air.
• Flow Measurement: Rotameter 2 Nos. (One each for Reactants).
• Piping: Stainless Steel and PVC
• Pressure Regulator: 0-2 Kg/cm2
• Pressure Gauge: Bourdon type 0-2 Kg/cm2
• Stop Watch: Electronic.
• Control Panel comprising of: Standard make on/off switch, Mains Indicator etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• The whole unit is assembled rigidly on a base plate and mounted on a stand.
• Most of the parts are powder coated and rest are painted with auto paints.

Price on Request: Get Latest Price

Price on Request: Get Latest Price

Computer Controlled - Combined Flow Reactor (With Data Logging Facility)

Description:

This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition in a combined reactor. It consists of two reactors connected in series, one is plug flow reactor and another mixed flow reactor. In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. In an ideal MFR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. The set up consists of two feed tanks through which two reactants are fed to the reactors fitted in series Peristaltic Pumps are provided to measure the individual flow of Chemicals. 1st is a helical coil tube type reactor made up of SS pipe. Reactants enter at lower end coming out of the top of coil from where it is fed to a MFR fitted with stirrer for proper mixing. Samples are collected for analysis. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by CL. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

• Sponification Reaction Study in a Combined Reactor
• To determine Reaction Rate Constant.

Utilities Required:

• Water Supply
• Floor Drain
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
• Computer System : Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       

• Reactor: Material Stainless Steel, Capacity (0.6-0.7) Ltrs. (approx)(Helical Coiled Tube Type)
• 2nd Reactor: Material Stainless Steel, Capacity 2 Ltrs (Approx).
• Stirrer for MFR: Stainless Steel Impeller and shaft coupled with FHP motor
• Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
• Feed circulation: By Peristaltic Pump (2 Nos.), Computer controlled for different RPM
• Product Analysis: By using Electronic Sensor, Output 4-20 mA.
• Piping: Stainless Steel and PVC
• Control panel comprises of: Standard make on/off switch, Mains Indicator etc.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Price on Request: Get Latest Price

Description:

Present set-up consists of a reactor vessel fitted with variable speed agitator and detachable baffles. This unit is designed to study chemical kinetics. Reactants are fed to the reactor, using pump and flow is regulated and monitored by individual Rotameter. A adjustable overflow device is provided in the reactor to conduct the experiment on different reactor volume. A Stainless Steel Coil is immersed in the reactor through which the hot water supply is circulated. Temperature of the hot water is controlled by means of Temperature Controller and it enables the students to enhance the experimentation capabilities.

Experimentation:

• To study the chemical kinetics.
• To study the effect of residence time.
• To study the effect of mixing speed.
• To study the effect of temperature on chemical reaction.

Utility Required:

• Water Supply and drain.
• Electricity Supply: 220 V AC, 50 Hz, Single Phase, 15 Amps power Socket.
• Table for set-up support.
• Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.

Technical Detail:

• Reactor Material: Acrylic/SS/Glass
• Capacity: Adjustable from 1 – 2 Ltrs.
• Agitator: Variable speed with speed control facility from 0 – 150 RPM.
• Impeller: 4 Square bladed (1 No.)
• Material: Stainless Steel.
• Baffles: Detachable.
• Piping: PVC.
• Feed Tank (2 Nos.) Material:     Acrylic/Stainless Steel/PVC
• Capacity: 20 Ltrs. Each
• Discharge Tank: One No.
• Material: PVC
• Capacity: 40 Ltrs.
• Water Bath: Material Stainless Steel 304 Grade, Double wall, insulated with Ceramic Wool.
• Heater: Nichrome wire Heater
• Pumps (3 Nos.): 2 Nos. for Chemical, 1 No. for hot water circulation.
• Control Panel comprises of: Digital Temp. Controller: 0-200°C, RTD PT-100 type (For Water Bath)
• With Standard make on/off switch, Mains Indicator etc.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• Whole assembly is fixed on a base plate, which can be installed on service unit.

Price on Request: Get Latest Price

The set-up is used to study a photo/photocatalyc reaction using a UV source provided in the form of an UV tube. This set-up can be used to carry out a parameter study under batch/continuous flow condition. A photo catalyst like TiO2 can be used. This set-up can also be used to study the mineralization of liquid effluent industrial streams & for purification of water. The set-up consists of reactor with inside reflecting surface. An UV source surrounding glass/quartz cylinder is placed centrally in the reactor.

Utilities Required:

• Water supply and drain
• Electricity-0.5kw, Single.
• Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted

Technical Details:

• UV Source: 30 W / 16 W
• Reactor: With inside reflective surface   Effective volume of reactor 1 1.5 Ltrs.
• Feed Tank: Material Stainless Steel, Capacity 5 Ltrs.
• Feed circulation: Magnetic Pump made of Polypropylene. Maximum
• Working temperature is 80°C.
• Flow Measurement: Rota meter
• Sampling points are provided at inlet & outlet of reactant line.
• Control panel comprising of: Standard make on off switch, Mains Indicator, fuse, power supply to UV source etc.