Creative Labs
Creative Labs
Khuda Khurd, Ambala, Haryana
GST No. 06BABPM7520F1Z0
Send E-mail
Call 0804603471462% Response Rate
Home  » Products » 

Fluid Machinery Lab


Prominent & Leading Exporter from Ambala, we offer reciprocating pump test rig (variable speed), gear pump test rig, gear pump test rig (variable speed), computer controlled - gear pump test rig, gear pump test rig (with three prefixed speeds) and jet pump test rig.

Ask for Price

Price on Request: Get Latest Price

Description:

The present Reciprocating Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Double acting, Single Cylinder Reciprocating Pump coupled with a DC Motor  Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of water is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.

Experimentation:

  • To determine total head, overall efficiency, pump efficiency and volumetric efficiency of the
  • reciprocating pump.
  • To plot Graph:
  • Head vs Discharge
  • Pump efficiency vs Discharge.

Utilities Required:

  • Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15amp combined socket with earth connection.
  • Water Supply Drain required.
  • Floor Area Required:  1.5 m x 0.75 m
  • Pump : Double acting, Single Cylinder. Capacity 1 HP Speed 250 RPM (max.) and Head 5 kg/cm2
  • (max.) Medium Flow : Clear Water
  • Drive : 1HP DC Motor with Thyristor controlled DC Drive for variable
  • speed
  • Sump Tank : Material Stainless Steel, Capacity 65 Ltrs.
  • Flow Measurement: Using Measuring Tank (made of stainless steel, Capacity 40 Ltrs.) and Electronic Stop Watch
  • Pressure Gauge : Bourdon type.
  • Control Panel Comprises of :
  • RPM measurement : Digital RPM Indicator with Proximity sensor.
  • Energy measurement : Electronic Energy meter, L&T make.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Gear Pump Test Rig (Variable Speed With Swinging Field Dyanometer)

Description:

The present Gear Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Gear Pump having a pair of meshed  gears, coupled with a swinging frame type DC Motor which permits direct torque measurement with the help of a spring balance. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of fluid is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.

Experimentation:

  • To determine total head, pump output, overall efficiency and pump efficiency.
  • To plot Graph:
  • Head vs Discharge
  • Pump efficiency vs Discharge.

Utilities Required:

  • Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth
  • Connection.
  • Oil: SAE 20W 40(30 lt.)
  • Drain required
  • Floor Area Required: 1.5 x 0.75 m.

Technical Details:

  • Pump : Speed 1500 RPM (max.) Capacity 1 HP, Head 5kg/cm2 (max.)
  • Medium Flow : Clear Oil.
  • Drive : 1 HP DC motor swinging frame type with Thyristor controlled
  • DC Drive for variable speed.
  • Spring Balance : Dial type.
  • Sump Tank : Capacity 35 Ltrs. (approx.)
  • Flow Measurement : Using Measuring Tank (Capacity 20 Ltrs. (approx.)) and Electronic Stop Watch
  • Pressure Gauge : Bourdon type
  • Vacuum Gauge : Bourdon type
  • Control Panel Comprises of :
  • RPM measurement: Digital RPM Indicator with Proximity sensor.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description:

The present Gear Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Gear Pump having a pair of meshed  gears, coupled with a DC Motor.  Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of fluid is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.
EXPERIMENTATION:
To determine total head, pump output, overall efficiency and pump efficiency.
To plot Graph:
Head vs Discharge
Pump efficiency vs Discharge.

Utilities Required:

  • Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Oil: SAE 20W 40 (30 litrs)
  • Floor Area required: 1.5 x 0.75 m.

Technical Details:

  • Pump: Speed 1500 RPM (max.)  Capacity 1 HP, Head 5kg/cm2 (max.)
  • Medium Flow: Clear Oil.
  • Drive: 1 HP DC motor with Thyristor controlled DC Drive for variable speed.
  • Sump Tank : Capacity 35 Ltrs. (approx.)
  • Flow Measurement : Using Measuring Tank (Capacity 20 Ltrs. (approx.)) and Electronic
  • Stop Watch
  • Pressure Gauge : Bourdon type
  • Vacuum Gauge : Bourdon type
  • Control Panel Comprises of :
  • RPM measurement: Digital RPM Indicator with Proximity sensor.
  • Energy measurement: Electronic Energy meter, L&T make.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • With the Apparatus
  • Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Computer Controlled - Gear Pump Test Rig - Variable Speed (With Data Logging Facility)

Description:

The present Gear Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Gear Pump having a pair of meshed gears, coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of fluid is measured by using flow sensor. Vacuum sensor is fitted on suction line and Pressure sensor is fitted on delivery line to measure the pressure. The present set-up has a facility to interface the system with computer which  enables  to  log  the  experimental  data  using  computer.  The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

  • To determine total head, pump output, overall efficiency and pump efficiency.
  • To plot Graph:
  • Head vs Discharge
  • Pump efficiency vs Discharge.

Utilities Required :

  • Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Oil: SAE 20W 40 (30 liters)
  • Floor Area required: 1.5 x 0.75 m.
  • Computer System : Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details :
       
  • Pump    :Speed 1500 RPM (max.) Capacity 1 HP, Head 5kg/cm2 (max.)
  • Medium Flow    :    Clear Oil.
  • Drive    :    Variable Speed controlled through computer signal.
  • Sump Tank    :    Capacity 35 Ltrs. (approx.)
  • Flow Measurement    :    By Using Flow Sensor.
  • Pressure Measurement    :    By Using Pressure Sensor, Vacuum Sensor.
  • RPM measurement    :    Digital RPM Indicator with Proximity sensor
  • Control Panel Comprises of :   
  • Energy meter    :    Electronic, L&T make.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description:

The present Gear Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Gear Pump having a pair of meshed gears, coupled with a AC Motor. Flow of fluid is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.

Experimentation:

  • To determine total head, pump output, overall efficiency and pump efficiency.
  • To plot Graph:
  • Head vs Discharge
  • Pump efficiency vs Discharge.

Utilities Required:

  • Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Oil: SAE 20W 40 (30 litrs)
  • Floor Area required: 1.5 x 0.75 m.
  • Tachometer to measure RPM

Technical Details:


  • Pump : Speed 1500 RPM (max.) Capacity 1 HP Head 5kg/cm2(max.)
  • Medium Flow : Clear Oil.
  • Drive : 1 HP Crompton make motor having Step Cone Pulley for
  • Three different speeds.
  • Sump Tank: Capacity 35 Ltrs. (approx.)
  • Flow Measurement: Using Measuring Tank (Capacity 20 Ltrs. (approx) and
  • Electronic Stop Watch
  • Pressure Gauge : Bourdon type.
  • Vacuum Gauge : Bourdon type
  • Control Panel Comprises of:
  • Energy measurement: Energy meter Electronic L&T make.
  • MCB: For overload protection.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual: An ENGLISH instruction manual will be provided along
  • With the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Description:

The present Jet Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a monoblock Jet Pump. Flow of fluid is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.

Experimentation:

  • To determine total head, pump output, overall efficiency and pump efficiency of the Jet pump.
  • To plot Graph
  • Head vs Discharge
  • Pump efficiency vs Discharge
  • Pump HP vs Discharge.

Utilities Required:

  • Electricity Supply: Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Water Supply (Initial Fill).
  • Floor Drain required.
  • Floor Area Required:  1.5m x 0.75m

Technical Details:

  • Pump : Monoblock jet pump of size 32mm x 25m x25mm
  • Capacity 1 HP.
  • Medium Flow : Clear Water.
  • Sump Tank : Capacity 100 Ltrs.
  • Flow Measurement : Using Measuring Tank (Capacity 70 Ltrs.) & Electronic Stop watch
  • Pressure Gauge : Bourdon type.
  • Control Panel Comprises of :
  • Energy measurement : Energy meter Electronic, L&T make.
  • MCB : For overload protection.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description:

The present Jet Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a monoblock Jet Pump. Flow of fluid is measured by flow sensor. Vacuum sensor is fitted on suction line and Pressure sensor is fitted on delivery line to measure the pressure. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

  • To determine total head, pump output, overall efficiency and pump efficiency of the Jet pump.
  • To plot Graph
  • Head vs Discharge
  • Pump efficiency vs Discharge
  • Pump HP vs Discharge.

Utilities Required:

  • Electricity Supply: Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Water Supply (Initial Fill).
  • Floor Drain required.
  • Floor Area Required:  1.5m x 0.75m
  • Computer System: Pentium IV with DVD Drive, Windows XP and MS Office XP version pre-loaded. One PCI slot required in PC for Data Acquisition CARD.

Technical Details:
       
  • Pump:    Monoblock jet pump of size 32mm x 25m x25mm Capacity 1 HP.
  • Medium Flow:    Clear Water.
  • Sump Tank    :    Capacity 100 Ltrs.
  • Flow Measurement    :    By Using Flow Sensor.
  • Pressure Measurement    :    By Using Pressure Sensor.
  • Control Panel Comprises of :   
  • Energy Measurement    :    Energy meter Electronic, L&T make.
  • MCB:    For overload protection.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Tanks will be made of Stainless Steel.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

DESCRIPTION:

In the present set-up water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in axial direction and hence it is called a mixed flow turbine. The runner is completely enclosed in a air tight casing and the casing & runner is always full of water. The water is fed to the turbine by means of Centrifugal Pump, radially to the runner which is directly mounted on one end of a central SS shaft and other end is connected to a eddy current dynamometer. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the runner. Load is applied to the turbine with the help of eddy current dynamometer so that the efficiency of the turbine can be calculated. A draught tube is fitted on the outlet of the turbine. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by CREATIVE LAB. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.
EXPERIMENTATION:
  To study the operation of a Francis Turbine.
  To determine the Output Power of Francis Turbine.
UTILITIES REQUIRED :
Electricity 5 kW, 440V AC, Three Phase.
Water Supply: Initial Fill.
 Floor Drain.
Computer System: i-3 processor with DVD Drive, Windows 7/8, MS-Office pre-loaded. One USB slot required in PC for Data Acquisition Card.

TECHNICAL DETAILS :

 

 

Output Power

:

3 kW

 

Runner

:

Having Curved Vanes.

 

Dynamometer

:

Rope Brake type, Dia. 300 mm.

 

Discharge Measurement

:

Differential Pressure Transmitter with Venturi

 

Pressure Measurement

:

Pressure Transmitter, Output 4-20 mA

 

Load Measurement

:

Load Cell with Transmitter (2 Nos.)


Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Francis Turbine Test Rig, Output Power 1 Kw (With Data Logging Facility)

Description:

In the present set-up water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in axial direction and hence it is called a mixed flow turbine. The runner is completely enclosed in a air tight casing and the casing & runner is always full of water. The water is fed to the turbine by means of Centrifugal Pump, radially to the runner which is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the runner. Load is applied to the turbine with the help of brake arrangement so that the efficiency of the turbine can be calculated. A draught tube is fitted on the outlet of the turbine. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

  • To study the operation of a Francis Turbine.
  • To determine the Output Power of Francis Turbine.

Utilities Required:

  • Water Supply : Initial Fill.
  • Floor Drain.
  • Electricity 5 kW, 440V AC, Three Phase.
  • Computer System: Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:

  • Output Power    :    1 kW
  • Runner    : Having Curved Vanes.
  • Dynamometer    :    Mechanical Dynamometer.
  • Discharge Measurement    : Differential Pressure Transmitter with Pitot Tube
  • Pressure Measurement    : Pressure Transmitter, Output 4-20 mA
  • Load Measurement : Load Cell with Transmitter (2 Nos.)
  • RPM Measurement    : Proximity Sensor
  • Water Circulation    :    Centrifugal Pump, Standard make, Capacity 5 HP Three Phase.
  • Control Panel Comprises of : L&T make, Starter, Mains Indicator, MCB for overload protection.
  • Tanks will be made of Stainless Steel.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description:

The present Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Centrifugal pump coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of water is measured by using measuring tank and stopwatch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.

Experimentation:

  • To determine total head, Pump Output, overall efficiency and pump efficiency of the centrifugal pump.
  • To plot Head vs Discharge, Pump efficiency vs Discharge, Pump Output vs Discharge.

Utilities Required:

  • Water Supply.
  • Drain.
  • Electricity 1 kW, 220V AC, Single Phase.
  • Floor Area 2 x 1 m.

Technical Details :

  • Pump: Kirloskar Make, Capacity 1 HP
  • Speed 2800 RPM (max.), Head 12 m (max.)
  • Medium Flow : Clear Water
  • Drive : 1 HP DC Motor with Thyristor controlled DC drive for variable speed.
  • Sump Tank : Capacity 110 Ltrs.
  • Flow Measurement : Using Measuring Tank with Piezometer, Capacity 70 Ltrs.
  • Stop watch : Electronic.
  • Pressure Gauge : Bourdon type
  • Control Panel Comprises of :
  • RPM measurement : Digital RPM Indicator with Proximity sensor.
  • Energy measurement : L&T make, Electronic Energy meter.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual: An ENGLISH instruction manual will be provided along
  • with the ApparatusTanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Computer Controlled - Centrifugal Pump Test Rig - Variable Speed (With Data Logging Facility)

Description :

The present Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Centrifugal pump coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. RPM of the pump is measured by Proximity sensor. Flow of water is measured by Flow Sensor, pressure is measured by Pressure Sensor and Vacuum is measured by Vacuum Sensor. This unit is capable to study the characteristics of Centrifugal Pump. The instrumentation done enables the user to study the same with ease. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

  • To determine total head, Pump Output, pump efficiency of the centrifugal pump.
  • To plot Head vs Discharge, Pump efficiency vs Discharge, Pump Output vs Discharge.

Utilities Required:

  • Water Supply.
  • Floor Drain.
  • Electricity 1 kW, 220V AC, Single Phase.
  • Computer System : Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.


Technical Details :
       
  • Pump    :    Centrifugal Type, Kirloskar Make.
  • Medium Flow    :    Clear Water
  • Drive    :Variable Speed controlled through computer signal.
  • Flow Measurement:    By Using Flow Sensor.
  • Pressure Measurement: By Using Pressure Sensor, Vacuum Sensor.
  • RPM Measurement    : By Using Proximity Sensor.
  • Sump Tank:    Material Stainless Steel, suitable capacity.
  • Tanks will be made of Stainless Steel.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description:

The present Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The setup consists of a Centrifugal pump coupled with an AC Motor. Flow of water is measured by using measuring tank and stopwatch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.

Experimentation:

  • To determine total head, overall efficiency and pump efficiency of the centrifugal pump.
  • To plot Head vs Discharge, Pump efficiency vs Discharge, Pump HP vs Discharge.

Utilities Required :

  • Water Supply.
  • Drain.
  • Electricity 1 kW, 220V AC, Single Phase.
  • Floor Area 2 x 1 m.
  • Tachometer to measure RPM

Technical Details :

  • Pump : Kirlosker Make, Capacity 1 HP
  • Speed 2800 RPM (max.)
  • Head 12 m (max.)
  • Medium Flow : Clear Water
  • Drive : 1 HP Crompton/GE make motor having Step Cone Pulley for
  • Three different speeds.
  • Sump Tank : Capacity 110 Ltrs.
  • Flow Measurement: Using Measuring Tank with Piezometer, Capacity 70 Ltrs.
  • Stop Watch: Electronic.
  • Pressure Gauge : Bourdon type.
  • Control Panel Comprises of :
  • Energy measurement: Electronic Energy meter, L&T make.
  • MCB : For overload protection.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • with the ApparatusTanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.
  • OPTIONAL:Digital Tachometer

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Centrifugal Pump Test Rig (Multi Stage, Variable Speed, Series & Parallel)

Description :

The present Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of two Centrifugal pumps. Both pump are coupled with individual Motors.Speed Control facility is provided to vary the RPM of motor. RPM Indicator with Proximity sensor indicates the RPM of Pump. Pipeline and valve arrangement provided enables the user to operate the test rig either in single pump operation, parallel mode or in series mode. Flow of water is measured by using measuring tank and stopwatch. Vacuum & Pressure gauges are fitted on suction line and delivery line of each pump to measure the pressure.

Experimentation:

  • The Centrifugal Pump Test Rig allows the students to understand the performance benefits of
  • Centrifugal Pumps in parallel  & series mode as under: -
  • Speed Vs Discharge.
  • Head Vs - Discharge at various speeds.
  • Efficiency curves at various speed and heads.

Utilities Required:

  • Electricity supply: Single Phase, 220 VAC, 50 Hz, 5-15 Amp combined socket with earth connection.
  • Water Supply (Initial fill)
  • Floor Drain required.
  • Floor Area required:  2 m x 1 m

Technical Details:

  • Pump (2 Nos.) : Centrifugal Type, 2800 RPM (max.)
  • Medium Flow : Clear Water
  • Drive : Variable speed.
  • Sump Tank : Made of Stainless Steel, Compatible capacity
  • Measuring Tank : Made of Stainless Steel, Compatible capacity
  • Stop Watch : Electronic
  • Pressure Gauge : Bourdon type, Range: 0-4 kg/cm2
  • Vacuum Gauge : Bourdon type, Range: 0-760 mm of Hg
  • Compound Gauge : Bourdon type, Range: -760 mm of Hg to 2 kg/cm2
  • Control Panel Comprises of:
  • RPM measurement : RPM Indicator with Proximity sensor.
  • Energy measurement : L&T make electronic energy meter.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • with the Apparatus
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Reciprocating Pump Test Rig (Variable Speed With Swinging Field Dyanometer)

Description:

The present Reciprocating Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Double acting, Single Cylinder Reciprocating Pump coupled with a swinging frame type DC Motor that permits direct torque measurement with the help of a spring balance. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates RPM of Pump. Flow of water is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure pressure.

Experimentation:

  • To determine total head, overall efficiency, pump efficiency and volumetric efficiency of the reciprocating pump.
  • To find out torque with the help of swinging frame motor.
  • To plot Graph: Head vs Discharge Pump efficiency vs Discharge.

Utilities Required:

  • Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth
  • connection.
  • Water Supply
  • Drain required.
  • Floor Area Required :  1.5 m x 0.75 m

Technical Details:

  • Pump: Double acting, Single Cylinder, Capacity 1 HP
  • Speed 250 RPM (max.) and Head 5kg/cm2(max.)
  • Medium Flow : Clear Water
  • Drive : 1 HP DC Motor swinging frame type with Thyristor controlled DC Drive for variable speed.
  • Spring Balance : Dial type,
  • Sump Tank : Material Stainless Steel, Capacity 65 Ltrs.
  • Flow Measurement : Using Measuring Tank (made of Stainless Steel & Cap. :40 Ltrs and Electronic Stop Watch.
  • Pressure Gauge : Bourdon type
  • Control Panel Comprises of:
  • RPM measurement: Digital RPM Indicator with Proximity sensor.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Reciprocating Pump Test Rig – Variable Speed (With Data Logging Facility)

Description:

The present Reciprocating Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Double acting, Single Cylinder Reciprocating Pump coupled with a DC Motor Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. RPM of the pump is measured by Proximity sensor. Flow of water is measured by Flow Sensor, pressure is measured by Pressure Sensor and Vacuum is measured by Vacuum Sensor. This unit is capable to study the characteristics of Reciprocating Pump. The instrumentation done enables the user to study the same with ease.The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

  • To determine total head, pump efficiency and volumetric efficiency of the reciprocating pump.
  • To plot Head vs Discharge, Pump efficiency vs Discharge.

Utilities Required:

  • Water Supply.
  • Floor Drain.
  • Electricity 1 kW, 220 V, Single Phase.
  • Computer System : Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded.
  • One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       
  • Pump: Double acting, Single Cylinder. Capacity 1 HP
  • Medium Flow:Clear Water
  • Drive: Variable Speed.
  • Flow Measurement:By Using Flow Sensor.
  • Pressure Measurement:    By Using Pressure Sensor, Vacuum Sensor.
  • RPM Measurement    :By Using Proximity Sensor.
  • Sump Tank:Material Stainless Steel, suitable capacity.
  • Tanks will be made of Stainless Steel.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Description:

The present Submersible Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Submersible Pump, which is mounted horizontally with sump tank. Flow of fluid is measured by using measuring tank and stop watch.

Experimentation:

  • To determine total head, pump output, overall efficiency and pump efficiency of the submersible pump.
  • To plot Graph
  • Head vs Discharge
  • Pump efficiency vs Discharge
  • Pump HP vs Discharge.

Utilities Required:

  • Electricity Supply: Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Water Supply (Initial Fill).
  • Floor Drain required.
  • Floor Area Required:  1.5m x 0.75m

Technical Details:

  • Pump : Submersible, Capacity 1 HP.
  • Medium Flow : Clear Water.
  • Sump Tank : Capacity 120 Ltrs.
  • Flow Measurement : Using Measuring Tank (Capacity 90 Ltrs.) & Electronic Stop Watch
  • Pressure Gauge : Bourdon type
  • Control Panel Comprises of :
  • Energy measurement : Energy meter Electronic, L&T make.
  • MCB : For overload protection.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Double Stage Air Compressor Test Rig (With Data Logging Facility)

Description:

Two Stage Air Compressor Test Rig consists of a double stage reciprocating type air compressor driven by Motor through a belt. The outlet of the air compressor is connected to reservoir (Tank) and suction is connected to another air tank with a calibrated orifice plate and a water manometer. Bellow is fitted on one side of the air tank to regulate the flow. Temperature of inlet air, after single compression, inlet and outlet of second compression and pressure in reservoir can be measured by Temp. Transmitter and Pressure Transmitter. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

  • To calculate the volumetric efficiency.
  • To calculate isothermal Power.
  • To calculate compression ratio.

Utilities Required:

  • Electricity 2 kW, 220V AC, Single Phase.
  • Water Supply Continuous @ 1 LPM at 1 Bar
  • Floor Drain Required
  • Floor Area 2.5 x 1.25 m.
  • Computer System: Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       
  • Compressor:    Kirloskar Make, Double Stage, Double Cylinder.
  • Capacity 6.9 CFM max, Working Pressure: Max. 7 kg/cm2
  • Motor    :2 HP Crompton/Standard make, Swinging Field type
  • Air Tank:    Capacity 150 Ltrs. with safety valve, shut off valve,
  • Air Flow Measurement    :Orificemeter with Differential Pressure Transmitter
  • Temperature Measurement    :By Temperature transmitter
  • Pressure Measurement    :By Load cell
  • Control Panel Comprises of:       
  • RPM measurement    :    RPM Indicator with Proximity sensor.
  • MCB:For overload protection.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Single Stage Air Compressor Test Rig (With Data Logging Facility)

Description:

Single Stage Air Compressor Test Rig consists of a single stage reciprocating type air compressor driven by 1 HP motor through a belt. The outlet of the air compressor is connected to reservoir (Tank) and suction is connected to another air tank with an orifice plate. Bellow is fitted on one side of this air tank to regulate the flow. Temperature and pressure of air can be measured by provided instrumentation. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

  • To calculate the volumetric efficiency.
  • To calculate isothermal power.
  • To calculate compression ratio.

Utilities Required:

  • Electricity 2 kW, 220V AC, Single Phase.
  • Floor Area 2 x 1 m.
  • Lubricating Oil : SAE – 40 20W40 (1 Ltr.)
  • Computer System : Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       
  • Compressor:    Single Stage, Capacity 4 CFM (max.),
  • Working Pressure 5 kg/cm² (max.)
  • Air Tank:    With safety valve and Control Valve.
  • Drive    :    1 HP motor, Crompton make.
  • Manifold Tank    :    Suitable Capacity.
  • Flow Measurement    :    Differential Pressure Transmitter with Orificemeter
  • Temp. Measurement    :    By Temperature Transmitter- 2Nos.
  • Pressure Measurement    :    By Pressure Transmitter.
  • RPM Measurement    :    By Proximity Sensor
  • Contro panel comprises of :   
  • Energy meter    :    Electronic type, for power measurement
  • Standard make On-off switch, mains indicator etc
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Description:

The present Submersible Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Submersible Pump, which is mounted horizontally with sump tank. Flow of fluid is measured by using flow sensor.The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

  • To determine total head, pump output, overall efficiency and pump efficiency of the submersible pump.
  • To plot Graph
  • Head vs Discharge
  • Pump efficiency vs Discharge
  • Pump HP vs Discharge.

Utilities Required:

  • Electricity Supply: Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Water Supply (Initial Fill).
  • Floor Drain required.
  • Floor Area Required:  1.5m x 0.75m
  • Computer System : Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:

       
  • Pump Submersible, Capacity 1 HP.
  • Medium Flow    :    Clear Water.
  • Sump Tank    :    Capacity 120 Ltrs.
  • Flow Measurement    :    By flow sensor
  • Pressure Measurement    :    Pressure sensor
  • Control Panel Comprises of :   
  • Energy Meter    :    Electronic, L&T make.
  • MCB    :    For overload protection.
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Tanks will be made of Stainless Steel.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Kaplan Turbine Test Rig, Output Power 1 Kw (With Data Logging Facility)

Description:

Kaplan Turbine is an axial flow reaction turbine named in honour of Dr. B. Kaplan, a German Engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the discharge (Q) must increase to produce the same power. The present set-up consists a runner. The water is fed to the turbine by means of Centrifugal Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a loading arrangement. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by C. L. Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

Experimentation:

  • To study the operation of Kaplan turbine.
  • To determine the Output Power of Kaplan Turbine.

Utilities Required:

  • Water Supply: Initial Fill.
  • Floor Drain.
  • Electricity 5 kW, 440V AC, Three Phase.
  • Computer System: Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded.
  • One USB slot required in PC for DATA ACQUISITION CARD.

Technical Details:
       
  • Output Power    :    1 kW
  • Dynamometer    :    Mechanical Dynamometer, complete with Torque sensor.
  • Discharge Measurement    :    Differential Pressure Transmitter with Pitot Tube
  • Pressure Measurement    :    Pressure Transmitter, Output 4-20 mA
  • Load Measurement    :    Load Cell with Transmitter (2 Nos.)
  • RPM Measurement    :    Proximity Sensor
  • Water Circulation    :    Centrifugal Pump, Standard make.
  • Control Panel Comprises of : L&T make, Starter, Mains Indicator, MCB for overload protection.
  • Tanks will be made of Stainless Steel.
  • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Kaplan Turbine Test Rig, Output Power 1 Kw

Description:

Kaplan Turbine is an axial flow reaction turbine named in honour of Dr. B. Kaplan, a German Engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the discharge (Q) must increase to produce the same power. The present set-up consists of a scroll casing housing a runner. Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of Centrifugal Pump. The runner is directly mounted on one end of a central shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draught tube and the casing for observation of flow on to the airfoil vanes. This runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of drum brake arrangement so that the efficiency of the turbine can be calculated. The set-up is supplied with control panel. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.

Experimentation:

  • To study the operation of Kaplan turbine.
  • To determine the Output Power of Kaplan Turbine.
  • To determine the turbine efficiency.

Utilities Required:

  • Electricity Supply: Three phase, 420 VAC, 50 Hz, 32 Amp. 4 Pole MCB with earth connection.
  • Water supply (Initial Fill)
  • Floor Drain Required.
  • Floor Area required: 3.5 x 1.5 m
  • Tachometer to measure RPM
  • Mercury for Manometer (250gms)

Technical Details:

  • Output Power : 1 kW.
  • Discharge : 1000 LPM
  • Supply Head : 5-8 M
  • Normal Speed : 2000 RPM
  • Dynamometer : Rope Brake type.
  • Water Circulation : Centrifugal Pump, CRI/Standard Make, Capacity 5 HP, 3 Phase.
  • Discharge Measurement : Pitot Tube with Manometer
  • Sump Tank : Capacity 200 Ltrs.
  • Pressure Measurement  : Pressure Gauge & Vacuum Gauge
  • Piping & Fittings  : Pipes & fittings with flow control valves of suitable size
  • Control Panel Comprises of:
  • L&T make Starter, Mains Indicator, MCB for overload protection.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

DESCRIPTION:

Pelton Wheel Turbine is only impulse water turbine now in common use named in honour of Sir L. A. Pelton (1829-1908) of California, USA. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the inlet of the turbine is only kinetic energy. The pressure at the inlet and outlet of the turbine is atmospheric. This turbine is used for high heads. The present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with a SS/Nylon-66 spear, by means of Centrifugal Pump, tangentially to the runner. Flow of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central SS shaft and other end is connected to eddy current dynamometer. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure. Load is applied to the turbine with the help of this eddy current dynamometer so that the efficiency of the turbine can be calculated.
 EXPERIMENTATION:

To study the operation of a Pelton Wheel Turbine.

To determine the Output Power of Pelton Wheel Turbine. To determine the Turbine Efficiency.

UTILITIES REQUIRED:

Electricity Supply: 15 kW, 440V AC, Three Phases. Water Supply and Drain.

Floor Area: 2 x 1.5 m.

Computer System: i-3 processor with DVD Drive, Windows 7/8, MS-Office pre-loaded. One USB slot required in PC for Data Acquisition Card.

TECHNICAL DETAILS:

Output Power

:

3 kW.

Impeller

:

Bucket type.

Nozzle

:

Material Stainless Steel.

Spear

:

Material Stainless Steel.

Dynamometer

:

Rope Brake type, Dia 300 mm.

Sump Tank

:

Compatible Capacity.

Water Circulation

:

Centrifugal Pump (Kirloskar make), Capacity 15 HP, Three Phase.

Discharge Measurement

:

Differential Pressure Transmitter with venturi

Pressure Measurement

:

Pressure Transmitter, Output 4-20 mA

Load Measurement

:

Load Cell with Transmitter (2 Nos.)

RPM Measurement

:

Proximity Sensor

  Control Panel Comprise Of: - L&T make, fully automatic star/delta Starter, Mains Indicator, MCB for overload protection. Tank will be made of Stainless Steel.

 


Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Pelton Wheel Turbine Test Rig, Output Power 1 Kw

Description:

Pelton Wheel Turbine is only impulse water turbine now in common use named in honour of Sir L. A. Pelton (1829-1908) of California, USA. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy  available at the inlet of the turbine is only kinetic energy. The pressure at the inlet and outlet of the turbine is atmospheric. This turbine is used for high heads. The present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with a SS spear, by means of Centrifugal Pump, tangentially to the runner. Flow of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid  MS structure. Load is applied to the turbine with the help of this brake
dynamometer so that the efficiency of the turbine can be calculated. Pressure gauge is fitted at the inlet of
the turbine to measure the total supply head to the turbine.

Experimentation:

  • To study the operation of a Pelton Wheel Turbine.
  • To determine the Output Power of Pelton Wheel Turbine.
  • To determine the Turbine Efficiency.

Utilities Required:

  • Water Supply and Drain.
  • Electricity 5 kW, 440V AC, Three Phases.
  • Floor Area 1.5 x 0.75 m

Technical Details:

  • Output Power: 1 kW.
  • Discharge: 400 LPM (Approx.)
  • Supply Head: 25 m
  • Speed: 1000 RPM (Approx.)
  • Nozzle: Material Stainless Steel.
  • Spear: Material Stainless Steel.
  • Dynamometer: Rope Brake type.
  • Sump Tank: Capacity 200 Ltrs.
  • Water Circulation: Centrifugal Pump, Standard make, Capacity 5 HP,
  • Three Phase, 2800 RPM
  • Discharge Measurement: Pitot tube with Manometer
  • Control Panel Comprises of:
  • L&T make Starter, Mains Indicator, and MCB for overload protection.
  • Instruction Manual: An ENGLISH instruction manual will be provided along
  • With the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Description:

Hydraulic Ram is used for pumping small quantity of water at high head, when large quantity of water at small head is available. It operates on the principle that if flowing water is suddenly brought to rest in a long pipe, a phenomena known as water hammer occurs, wherein a pressure wave travels along the pipe. This principle is used in the Hydraulic Ram to pump water. The set-up consists of a box incorporating pulse and non-return valves and a supply reservoir on a stand which is fed by the overhead tank. An air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic.

Experimentation:

  • To find out discharge of useful water and waste water.
  • To find out the efficiency of the Hydraulic ram.

Utilities Required:

  • Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Water Supply (Initial Fill)
  • Floor Drain required.
  • Floor Area Required: 1.5 m x 0.75 m

Technical Details:

  • Ram : Supply Head 1.0 m, Delivery Head 4 m (Max.)
  • Water Circulation : FHP Pump, Crompton make.
  • Sump Tank : Capacity 140 Ltrs. (approx.)
  • Overhead Tank : Capacity 50 Ltrs. (approx.)
  • Air Vessel : Suitable Capacity.
  • Flow Measurement : Using Measuring Tank & Electronic Stop Watch for waste water
  • and for useful water
  • Pressure Gauge : Bourdon type.
  • Control Panel Comprises of :
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along
  • with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested


 






Corporate Brochure




 

 

Send SMS
Sagar Sharma  (Managing Director)
Creative Labs
,12,Jagadhari Road,,chota khudda Industrial Estate
Khuda Khurd, Ambala - 133001 , Haryana , India
Send E-mail
Share Us:
X